Home > Surface Finder > Granite


Different surfaces have different requirements in order to keep their beauty and integrity. Aqua-Seal STS offers Pre-Grout Sealing, Sealing, Maintenance and Restoration specifications. These are listed below for your convinience.

Granite is an igneous (volcanic) rock formed from the slow cooling of rock in the deep upper part the earths’s crust. It is a very hard, granular, crystalline, rock consisting mainly of quartz, mica and feldspar. Granite is the best-known igneous rock. It is easily recognized due to its coarse-grain. As it is one of the hardest wearing stones, it is the choice of stone most commonly used as counter tops, floor tiles, paving stone, curbing, stair treads, building veneer, and cemetery monuments.


FLAMED -The flamed finish, is an old world, rustic, rough look.

HONED -A honed finish is smooth with little or no gloss (flat or satin finish).

POLISHED – A polished finish is smooth with a high gloss which also brings out the colour of the stone.

TUMBLED – A tumbled finish is a matt antique/old world look with irregular edges achieved during the tumbling/ageing process.

Select & Click on the button above for Pre-Grout Sealing, Sealing, Maintenance and Restoration specifications for flamed, honed, polished and tumbled granite.

Important Note

Read entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application & desired results.

Sealers Plus