Home > Surface Finder > Bluestone > Bluestone Flamed

BLUESTONE FLAMED – CLEANING & SEALING

Different surfaces have different requirements in order to keep their beauty and integrity.
Aqua-Seal STS offers Pre-Grout Sealing, Sealing, Maintenance and Restoration specifications. These are listed below for your convenience.

Bluestone is an igneous (volcanic) rock formed from the rapid cooling of magnesium-rich and iron-rich lava exposed at or very near the earths’s surface. Bluestone is usually grey to black in colour with subtle patterns & is fine grained. Small holes throughout the stone are formed as the lava is cooled rapidly at the earth’s surface. These holes are usually filled at the factory during fabrication or with grout or cement during installation. As Bluestone weathers, the colours can show changes to brown or rust-red due to oxidation into rust of its iron-rich minerals. The flamed, old world, rustic look is achieved by wetting, then running an oxygen-acetlyene or propane torch over the stone causing the surface layer to expand and flake off, exposing rough stone.

[accordions id=”20471″]

Important Note

Read entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application & desired results.

Sealers Plus