Home > Problem Solving > Remove Heavy Soap Scum & Water Deposits from Tiles

HOW TO REMOVE HEAVY SOAP SCUM & WATER DEPOSITS FROM TILES

Step-by-step instructions for ceramic, porcelain, tessellated and terracotta tiles and other acid-resistant surfaces, from the team who make Sealers Plus Professional Grade products in Kurnell, NSW.

Problem solver · Heavy soap scum

Dilute, dwell, scrub, rinse

OxiTreat+ is a Professional Grade, concentrated acid cleaner and commercial grade disinfectant that helps remove heavy soap scum, hard water deposits, bore water stains and grime from acid-resistant tiles. On shower walls and other vertical surfaces, use Oxi Gel+, the ready-to-use cling gel.

  • Floors: OxiTreat+, dilute from 1:20 (see dilution rates)
  • Shower walls: Oxi Gel+, ready to use. See heavy soap scum on shower walls
  • Minimum 10 minutes dwell time. Don't let it dry on the surface
  • Scrub, pick up with a wet vac, then rinse thoroughly
  • For acid-resistant surfaces only. Always test first
  • Protect chrome, glass and metal fittings
  • Keep away from non-recommended surfaces
OxiTreat+ 4 litre
OXITREAT+ · FLOORS
1 L · 4 L · 15 L
Oxi Gel+ 1 litre
OXI GEL+ · WALLS
1 L · 4 L

What is soap scum?

Soap scum forms when soap, shampoo and body oils react with the minerals in water. Combined with hard water or bore water deposits, it builds up into a dull, cloudy white film on tiles and grout, especially in showers.

Heavy build-up can trap dirt and help mould and mildew grow. A pH neutral cleaner won't shift it, so heavy soap scum needs an acid cleaner on acid-resistant surfaces.

TIP: once clean and dry, seal with Aqua-Seal Gold+ and clean regularly with EzyClean+ to help reduce build-up.

Before & after

Before & after

Suitable for

Where to use

  • Domestic: homes, units, duplexes etc
  • Commercial: hotels, shopping centres, restaurants, schools, aged care etc

Not for

What you'll need

  • OxiTreat+ (floors) or Oxi Gel+ (walls)
  • Scrub'N'Clean Kit, white nylon pad or scrub brush
  • Grout brush for the joints
  • Plastic bucket and measuring jug (never metal)
  • Broom, plus a wet vac (recommended) or mop
  • Plenty of clean water and cotton towels
  • Acid-resistant gloves, eye, skin and foot protection
  • Optional: slow-speed scrub machine for larger areas

Before you start

  • Always do a test area first
  • Surface temperature between 4°C and 32°C
  • Work out of direct hot sun and wind so the solution doesn't dry
  • Protect metal, chrome and glass fittings, plants and any acid-sensitive surfaces nearby
  • Ventilate the area well
  • Keep children and pets away until the area is rinsed and dry

Step-by-step

Prepare → Treat → Remove + rinse
Prepare the area1Prepare

Prepare the area

Sweep, vacuum or wipe the surface. Protect metal, chrome and glass fittings, plants and any acid-sensitive surfaces nearby.

Do a test area first2Prepare

Do a test area first

VERY IMPORTANT
Try your dilution on a small, hidden spot. Check colour stability, dark grouts and grout colourants, and how well the soap scum lifts. Start with the weakest dilution that works.

Dilute OxiTreat+3Treat

Dilute OxiTreat+

Always add OxiTreat+ to clean water in a plastic bucket to prevent splashing. Choose the ratio from the dilution rates below. Walls? Oxi Gel+ is used neat, no dilution.

Apply evenly4Treat

Apply evenly

Carefully apply the diluted solution to the surface with a mop or sponge. Work in sections you can keep wet.

Allow 10 minutes dwell time5Treat

Allow 10 minutes dwell time

Allow a minimum dwell time of 10 minutes. Don't allow the product to dry on the surface: add more diluted product to keep it wet and active. Heavy build-up may need a longer dwell time and/or a stronger solution.

Scrub6Treat

Scrub

Scrub with a white nylon pad, scrub brush or scrub machine. Scrub dirty grout joints with a grout brush.

Pick up and rinse7Remove + rinse

Pick up and rinse

Remove the dirty solution with a wet vac or mop, then rinse thoroughly with clean water and pick up the rinse water too.

Check when dry, repeat if needed8Remove + rinse

Check when dry, repeat if needed

Check the area once it is fully dry. Repeat the process as necessary until you're happy with the result.

Dilution rates: OxiTreat+

UseRatioPer 4 litres of water
Light cleaning + disinfecting1:20 – 1 part OxiTreat+ to 20 parts waterAdd 200 mL OxiTreat+ (makes 4.2 L)
Moderate cleaning + disinfecting1:10 – 1 part OxiTreat+ to 10 parts waterAdd 400 mL OxiTreat+ (makes 4.4 L)
Heavy duty cleaning + disinfecting1:5 – 1 part OxiTreat+ to 5 parts waterAdd 800 mL OxiTreat+ (makes 4.8 L)
Extreme cleaning1:2 – 1 part OxiTreat+ to 2 parts waterAdd 2 L OxiTreat+ (makes 6 L)

Always add OxiTreat+ to clean water to prevent splashing. Walls? Oxi Gel+ is ready to use: no dilution required.

Tips for the best result

  • Work in small sections and never let the solution dry on the surface
  • Protect chrome tapware, glass screens and metal drain grates
  • Shower walls: use Oxi Gel+, it clings to vertical surfaces. See Remove Heavy Soap Scum from Shower Walls
  • Squeegee or wipe showers dry after use to help reduce build-up
  • On dark grouts and grout colourants, check the test area once fully dry

Aftercare

Aqua-Seal Gold+

Aqua-Seal Gold+: seal the clean, dry surface for easier maintenance.

EzyClean+

EzyClean+: Daily / Weekly cleaning, pH neutral.

XtremeClean+

XtremeClean+: Half yearly or as needed heavy-duty clean.

Precautions

  • Read the entire label, SDS and technical bulletin before using
  • Wear acid-resistant gloves, protective clothing and eye/face protection
  • Do NOT breathe fumes, mist, vapours or spray. Use in a well ventilated area. Do not kneel in product
  • Use when the surface temperature is between 4°C and 32°C
  • Do NOT allow contact with acid-sensitive surfaces, metals, chrome or glass fittings
  • Do NOT mix in metal containers or with other chemicals (especially chlorine bleach)
  • May affect dark grouts, grout colourants and polished surfaces
  • Hard surface disinfectant only. Do NOT use on skin
  • WASH UNDERSIDE OF SHOES BEFORE STEPPING ONTO OTHER AREAS.

Limitations

For acid-resistant surfaces only. Do not use on marble, limestone, travertine or other acid-sensitive tile or stone. Badly stained grout may require re-grouting or re-colouring with Colour'N'Seal.

For other stains and problems, see our Problem Solvers and the Stain Removal Guide.

For additional options, contact the Sealers Plus Technical Services Team at support@sealersplus.com.au or call +61 2 9521-4000 with details of the problem you are addressing.

Important note

These recommendations are general guidelines for problem solving. Actual dilution ratios and cleaning requirements may vary depending on the surface, the use, the amount and the method of application.
Read the entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application, dilution, dwell time and desired results.
Keep the surface clean and dry to reduce the possibility of slip-fall accidents.
Sealers Plus