How To Remove Cement Based Adhesive from Tiles

PURPOSE

Step by step instructions to remove and clean off cement based adhesive from porcelain tiles and ceramic tiles.

PRODUCT

OXITREAT+

FOR FLOOR AREAS – OXITREAT+ – PROFESSIONAL GRADE HEAVY DUTY GROUT HAZE, GRIME, SOAP SCUM CLEANER & DISINFECTANT

OxiTreat+™ formulated with latest, cutting edge ActivePlus™ technology, is a Professional Grade, fast acting, concentrated acid cleaner, degreaser and commercial grade disinfectant. Formulated to kill odours, disinfect, sanitise plus remove in ground dirt, remove grout haze, light epoxy grout haze, cement smear, efflorescence, pencil, rust, grime, soap scum, bore water stains, mould & mildew. Helps inhibit mould growth. Ideal for areas that have been neglected or subject to heavy use. For indoor, outdoor, domestic & commercial areas e.g. hotels, shopping centres, resorts, restaurants, apartments etc Safe for food floor preparation areas. 

USE: For Porcelain, Ceramic and Tessellated Tiles.

KEY FEATURES

+ ActivePlusAntibacterial Action & Commercial Grade Disinfectant

+ Kills Odours, Bacteria and Germs. Cleans, Disinfects and Sanitises

+ Highly Concentrated Heavy Duty Acid Formula – Dilution from 1:20

+ Cleans Grout Haze, Dirt, Grime, Soap Scum, Rust, Efflorescence etc

+ Kills E-Coli & S Aures – Passes TGA Test for Commercial Disinfectant

OxiTreat+ Heavy Duty Acid Cleaner and disinfectant to remove grout haze, heavy grime, efflorescence, rust, pencil and hard water deposits
Made in Australia

PRODUCT

FOR WALLS AND VERTICAL SURFACES – OXI GEL+ – HIGH VISCOSITY CLING GEL CLEANER FOR GROUT HAZE, SOAP SCUM, RUST, EFFLORESCENCE AND MORE

Oxi Gel+ formulated with latest, cutting edge ActivePlus Antibacterial Action Cling Gel technology, is a Professional Grade, fast acting, ready to use, high viscosity, acid gel cleaner, degreaser and Commercial Grade Disinfectant. Perfect for vertical surfaces. Kills odours, disinfects, sanitises plus cleans in-ground dirt, grout haze, light epoxy grout haze, cement smear, efflorescence, pencil, rust, grime, soap scum, bore water stains, mould and mildew. Helps inhibit mould growth. Ideal for areas that have been neglected or subject to heavy use. Kills E-Coli and S Aureus as evaluated in accordance with TGA Test for Commercial Grade Disinfectants.

KEY FEATURES

+ Kills Odours, Bacteria & Germs. Easy To Use

+ Deep Cleaner, Problem Solver and Disinfectant

+ Ready To Use – High Viscosity Cling Gel Formula

+ Inhibits Mould, Mildew Growth and Soap Scum Build Up

+ Kills E-Coli & S Aures – Passes TGA Test for Commercial Disinfectant

+ Ideal for Grout Haze, Rust, Soap Scum, Efflorescence, Pencil and more

+ ActivePlusAntibacterial Action & Commercial Grade Disinfectant

Oxi Gel+ Heavy Duty Acid Gel Cleaner and disinfectant to remove grout haze, heavy grime, efflorescence, rust, pencil and hard water deposits
Made in Australia

EQUIPMENT

PRECAUTIONS

PRECAUTIONS & SAFETY DIRECTIONS: 

  1. Read entire label, SDS and technical bulletin before using;
  2. Wear appropriate gloves, skin and eye protection;
  3. Do NOT breathe fumes, mist, vapours or spray or kneel in product;   
  4. Use when surface temperature is between 4°C & 32°C;
  5. Do NOT allow contact with acid sensitive surfaces;
  6. Do NOT mix in metal containers or with other chemicals;
  7. May affect dark grouts, grout colorants & polished surfaces;
  8. Hard surface disinfectant only. Do NOT use on skin;

PROCEDURE

HOW TO DILUTE & USE FOR FLOORS:

Always add OxiTreat+ to clean water to prevent splashing.

    1. Sweep, vacuum, or wipe surface;
    2. Dilute depending on cleaning requirements;
      • HEAVY DUTY CLEANING & DISINFECTING
        RATIO 1:5 –  1 part OxiTreat+ to 5 parts water
        (670 ml OxiTreat+ to 3330 ml water =  4 litres cleaner)
      • EXTREME CLEANING & DISINFECTING
        RATIO 1:2 –  1 part OxiTreat+ to 2 parts water
        (1.30 L OxiTreat+ to 2.70L water =  4 litres cleaner)
    3. Carefully apply diluted solution to surface;
    4. Allow minimum dwell time of 10 minutes;
    5. DON’T ALLOW PRODUCT TO DRY ON SURFACE – ADD MORE;
    6. Scrub with a white nylon pad, scrub brush or scrub machine;
    7. Remove the dirty solution with a wet vac or mop;
    8. Rinse thoroughly with clean water;
    9. Repeat the process as necessary.

PROCEDURE

HOW TO DILUTE & USE FOR WALLS AND VERTICAL SURFACES:

HOW TO USE:

Ready to use formula. No dilution required. Use neat.

  1. Sweep, vacuum, or wipe surface;
  2. Pour Oxi Gel+ to gloved hand, sponge or white nylon pad;
  3. Smear Oxi Gel+ evenly over entire surface to be cleaned;
  4. Allow minimum dwell time of 10 minutes;
  5. DON’T ALLOW PRODUCT TO DRY ON SURFACE – ADD MORE;
  6. Scrub with a white nylon pad, scrub brush or scrub machine;
  7. Remove the dirty solution with a wet vac or mop;
  8. Rinse thoroughly with clean water;
  9. Repeat the process as necessary.

For additional options, please contact the Sealers Plus Technical Services Team via e-mail sales@sealersplus.com.au or +61 2 9521 4000 with information specific to the problem you are addressing.

Important Note

  • These recommendations are intended as general guidelines for Problem Solving.
  • The actual product dilution ratios and cleaning requirements may vary depending on the use, amount and method of application.
  • Read entire Product Label, SDS and Technical Bulletin before using any product.
  • ALWAYS TEST A SMALL AREA to determine the ease of application, dilution, dwell time & desired results.
  • Keep surface clean and dry to reduce possibility of slip-fall accidents.
Sealers Plus