For additional options, please contact Aqua-Seal STS Technical Services via
e-mail sales@aqua-seal.com.au or +61 2 9521 4000 with information specific to the problem you are addressing.
Solutions To Common Stone, Tile & Grout Problems
Step by step instructions for solutions to the most common problems associated with Stone, Tile, Encaustics, Terrazzo & Grout
- PS 01 – How To Clean Rough, Textured Tiles
- PS 02 – How To Remove Light Grout Haze from Tiles
- PS 03 – How To Remove Heavy Grout Haze from Tiles
- PS 04 – How To Remove Grout Haze from Natural Stone
- PS 05 – How To Remove Grout Haze from Encaustic and Terrazzo Tiles
- PS 06 – How To Remove Light Epoxy Grout Haze
- PS 07 – How To Remove Heavy Epoxy Grout Haze
- PS 08 – How To Remove Efflorescence from Tiles
- PS 09 – How To Remove Porcelain Wax
- PS 10 – How To Remove Porcelain Wax (Heavy)
- PS 11 – How To Remove Deep Stains
- PS 12 – How To Remove Pencil, Metal & Rust
- PS 13 – How To Remove Remove Adhesive and Mastic
- PS 14 – How To Remove Ink, Marker, Paint and Silicone
- PS 15 – How To Remove Sealer Residue
- PS 16 – How To Remove Sealers & Coatings (Stripping)
- PS 17 – How To Remove Enhance’N’Seal Residue
- PS 18 – How To Remove Enhance’N’Seal Residue (Partially Cured)
- PS 19 – How To Remove Waxes & Floor Finishes from Stone & Terrazzo
- PS 20 – How To Remove Waxes & Floor Finishes from Stone & Terrazzo (Heavy)
- PS 21 – How To Remove Soap Scum, Hard Water Deposits (Light)
- PS 22 – How To Remove Soap Scum and Hard Water Deposits from Tiles (Heavy)
- PS 23 – How To Remove Soap Scum, Hard Water Deposits from Natural Stone
- PS 24 – How To Remove Soap Scum, Hard Water Deposits from Terrazzo and Encaustic Tiles
- PS 25 – How To Remove Algae, Mould and Mildew
- PS 26 – How To Remove Leaf and Tannins from Stone, Tiles, Pavers
- PS 27 – How To Remove Smoke, Soot, Hydrocarbons, Red Soil
- PS 28 – How To Create Anti-Slip on Slippery Tiles
- PS 29 – How To Darken Light or Faded Grout
- PS 30 – How To Re-Colour Stained & Blotchy Grout
Important Note
These recommendations are intended as general guidelines for Problem Solving.
The actual product dilution ratios and cleaning requirements may vary depending on the use, amount and method of application.
Read entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application, dilution, dwell time & desired results.
Keep surface clean and dry to reduce possibility of slip-fall accidents.