Fantastic product!
Home > Products > Sealers > Gloss’N’Seal
Home > Products > Sealers > Gloss’N’Seal
+ Ideal for Textured Natural Stone, Terracotta, Pavers etc
+ NanoPlus Gloss Film Finish – For Indoor & Outdoor Areas
+ UV Resistant – Non Yellowing – Durable and Hard Wearing
+ Used & Trusted by Professionals – The Gold Standard
+ Maximum Stain Resistance Against Oil, Food and Grime
+ UV and Skuff Resistant – Non Yellowing – Hard Wearing and Durable
GLOSS’N’SEAL is a Professional Grade, High Performance, NanoPlus Water Based, Coating Sealer to provide a Gloss Film Finish to porous, rough, textured surfaces. Water Based, Breathable (Allows Moisture Vapour Transmission), Skuff Resistant, UV Resistant, Non-Yellowing, Hard Wearing and Durable. Easy to maintain.
USE: For indoor, outdoor, domestic and commercial areas. For rough, textured porous surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, sandstone, travertine etc plus terrazzo, concrete, pavers, saltillo, grout and other surfaces where a high gloss film finish and maximum stain and water resistance is required.
• 1 litre • 4 litre
All the important information


NanoPlus coating sealer molecules chemically bond to the rough or textured surface, creating a hard wearing, durable, high sheen film. Dirt and liquids can then be cleaned off the surface more easily before they stain. Adds a high gloss finish depending on the number of coats applied.
Works on: all natural stone, encaustic, terrazzo, pavers etc. The surface must be porous, rough and/or textured to allow the product to properly bond. Adds a high gloss finish depending on the number of thin, even coats applied.
Not suitable for: polished or smooth surfaces, or porcelain, ceramic and tessellated tiles.
For domestic, commercial, indoor and outdoor areas e.g. homes, supermarkets, airports, hotels, resorts, foyers, retail stores, walkways, driveways, kitchens, restaurants, bars etc.
Test first: always test in an inconspicuous area to determine ease of application, number of coats required and the final desired result. The end user must determine suitability of the product for their own use.
Preparation of surface: use XtremeClean+ or Stone Wash+ to clean and prepare the surface before sealing.
Tip: if further slip resistance is required, add Grip-It P Powder (anti-slip powder additive) to the final coat.
Approximately 40-60 m² per 4 litres per coat of Gloss'N'Seal. Coverage will vary depending on the porosity and texture of the surface, weather conditions, application method and number of coats required.
Coverage calculator
Sealer is not a waterproofing agent and will not prevent surface wear or etching from harsh or acidic chemicals. Wipe spills as soon as possible to help reduce staining and slip falls. Do not use in areas where puddling water might occur or where there is insufficient water run off.
Expected wear: will vary depending on surface texture and hardness, traffic wear, plus the frequency and type of cleaning products used. Harsh cleaning including pressure washing, high alkaline, acidic or solvent-based cleaners and/or weather exposure will affect wear and performance. High traffic and exterior areas will require more frequent re-application. Re-seal as necessary.
Maintenance: apply additional coats of Gloss'N'Seal over time as required. Only use EzyClean+ for routine, everyday/weekly cleaning and disinfecting. It is an easy to use, rinse free and streak free, concentrated pH neutral cleaner that does not affect the coating sealer or the sealed surface.
Stripping: use either Aqua-Strip or Strip-It, depending on the number of coats that have been applied over the years, when it's time to remove the existing coating and start afresh.
Test first in an inconspicuous area to determine ease of application, number of coats required and the final desired result.
Handling & storage: close the container tightly after each use. Store in the original container between 4°C and 32°C. Shelf life is approximately 3 years in an unopened container - less after opening. Storage beyond that time does not necessarily mean the product is not usable; do a small test area first. Do not re-use the container, discard in rubbish. Clean tools and clothing with water before they dry.
First aid: contact the Poisons Information Centre (Australia Ph: 131-126, NZ Ph: 0800 764-766). Avoid contact with skin and eyes. Do not swallow; if swallowed do not induce vomiting, rinse mouth well with water. If in eyes, hold eyelids apart and immediately flush the eye with clean, running water for at least 15 minutes and see a doctor. If on skin, wash thoroughly with water. If feeling unwell, seek medical attention.
Customer reviews
Fantastic product!
Very easy to apply. Dries quickly with minimal odour. Looks fabulous.
Explore the range
Good, Better or Best protection, from natural look to colour enhancing and gloss finishes.
View all Sealers →Biodegradable cleaners to clean and maintain stone, tile and grout without harming your sealer.
View all Cleaners →Targeted products to help remove efflorescence, grout haze, rust, stains and mould, plus anti-slip.
View all Problem Solvers →Applicators, scrubbing kits and care kits that make sealing and cleaning easier.
View all Accessories →