Professional Grade Premium Colour Enhancing Sealer For Natural Stone, Terrazzo, Encaustics, Concrete, Grout and more (Best)

Image comparison of Enhance’N’Seal colour enhancer compared to natural look stone.
ENHANCE'N'SEAL: Enhances, darkens, and highlights colour of stone, terrazzo, and encaustic tiles.

Enhance’N’Seal – To seal and colour enhance stone, encaustics, grout, concrete etc

ENHANCE’N’SEAL is a 100% Actives, premium, penetrating colour enhancing sealer and no sheen sealer for maximum stain resistance and to enhance, darken, highlight & rejuvenate colour. Non-Flammable, Non-Yellowing and UV Resistant. Can be used as a pre-grouting sealer. Breathable – Allows Moisture Vapour Transmission (MVT). Reduces Freeze/Thaw Damage, Spalling & Efflorescence. Inhibits Mould & Mildew growth. For indoor, outdoor, domestic & commercial areas. Safe for food preparation areas.

USE: For porous and unsealed surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus Encaustic Tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces where an enhanced look and maximum stain and water resistance is required.

Note: For high traffic, commercial or food areas or where premium performance/stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for an enhanced, enriched look use ENHANCE’N’SEAL.

Key Features
  • NanoPlus Formula for Deep Protection – Low VOC;
  • Darkens – Enhances – Highlights & Rejuvenates Colour;
  • Maximum Stain Resistance Against Oil, Food and Grime;
  • Reduces Freeze/Thaw Damage, Spalling and Efflorescence;
  • Latest State of the Art Poly Seal Technology – 100% Active Solids;
  • UV Resistant – Non Flammable – Inhibits Algae, Mould and Mildew;
  • For Wall, Floor, Interior, Exterior, Domestic & Commercial Applications.


Enhance’N’Seal is a Professional Grade, 100% Actives, Low VOC, below surface, breathable, penetrating type, sealer and colour enhancer. Maximum stain resistance against oil, food, grease and grime. Also enhances, darkens and rejuvenates colour. Ideal for food and high traffic areas. Safe for food preparation areas.


For indoor, outdoor, domestic and commercial areas for a no sheen, darker, colour enhanced look and maximum stain resistance. 


Always test first in an inconspicuous area to determine ease of application, coats required, colour stability & desired results. The end user must determine suitability of product for their own use.


1. Read entire label, SDS and technical bulletin before using;  

2. Wear appropriate gloves, skin and eye protection;  

3. Use when surface temperature is between 4°C & 32°C;

4. Surface must be clean, dry and free from sealers and coatings;

5. Do NOT allow sealer to drip or leave drip marks on the surface;

6. Do NOT use on the underside of the tile or stone. If six sided/dip sealing is required, then use Ultra-Block;

7. Once surface has been colour enhanced it CANNOT be restored back to original look;


Use XtremeClean+or StoneWash+ as per label to clean and prepare the surface before sealing;


For quick and easy clean-up after grouting as porous surface may stain during install & grouting.

1.  Pre-seal surface before installing or 24 hours after installation;

2.  Do NOT saturate the open grout joints; 

3.  Allow minimum 24 hours cure time before grouting;

4.  If using dark or contrasting grout, apply Grout Release Pro after Enhance’N’Seal has cured, then grout as usual.


1.  Apply sealer to clean, dry surface using a sealer applicator, sealer sponge, brush, paint roller or paint pad;

2. Ensure even coat & coverage then work product in thoroughly;

3. After 5-10 minutes, wipe the surface COMPLETELY DRY with absorbent paper or cotton towels to remove any excess;


5. Repeat this process for each application;


1.  For vertical surfaces apply bottom to top and avoid rundown;

2.  Porous surfaces will require additional coats. If 2 or more coats are required, allow minimum 30 minutes between coats; 

3.  2 hours after the final coat, conduct a test to determine if surface is properly sealed. Apply a few water droplets. If water is easily absorbed then apply an additional coat of sealer. Wait 2 hours and repeat the test. 

4. The surface is ready for light traffic after 2 hours. Keep dry for  minimum 48 hours.  Full cure in minimum 48 hours.


NOT a waterproofing agent and will NOT prevent surface wear, scuff marks or etching from harsh or acidic products. Spills should be wiped up immediately to help minimise staining.


Will vary depending on surface texture and hardness, traffic wear plus frequency and type of  cleaning products used. Harsh cleaning including pressure washing, high alkaline, acidic or solvent-based cleaners and/or weather exposure will affect wear and performance. High traffic and exterior areas will require more frequent re-application. RE-SEAL AS NECESSARY


Approximately 40-160m2 per 4 litre per coat. It will vary depending on the density, porosity, texture and absorption. Also weather conditions, the application method and number of coats required. See table below as a guide (per 4L per coat). Full coverage chart at www.sealersplus.com.au

  • Bluestone Flamed   60-80 m2   • Marble Honed   80-100 m2   • Terrazzo Honed   80-100 m2
  • Encaustic Tiles   60-80 m2   • Sandstone   60-80 m2   • Travertine Honed   80-100 m2


  • EzyClean+ for routine, everyday cleaning plus disinfecting;
  • XtremeClean+ for periodic heavy duty cleaning and disinfecting;
  • Stone Wash+ for cleaning, conditioning and disinfecting of stone;
  • Stone Gel+ for cleaning and disinfecting vertical surfaces;
  • ReFresh+ for cleaning and disinfecting food surface areas;


Close container tightly after each use; Store in original container between 4°C & 32°C. Shelf life is approximately 1 year in unopened container – less after opening; Product may harden or gel in container if not stored correctly or past shelf life. Storage beyond that time does not necessarily mean the product is not usable. Do a small test area first; Do not re-use container. Discard in rubbish; Clean tools with mineral spirits before they dry.


Contact a doctor or Poisons Information Centre (Aust 131-126, NZ 0800 764 766). If in eyes, hold eyelids apart & flush continuously with running water until advised to stop or for at least 15 minutes. If skin or hair contact occurs, remove contaminated clothing and flush skin or hair with running water. If inhaled, remove to fresh air. If ingested, wash mouth with water. Do NOT induce vomiting.


The Sealers Plus range of accessories are designed to make sealing, cleaning and problem solving applications easier.

Cleaning Products

The Sealers Plus range of biodegradable Professional Grade Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.

Other Sealer Options

The Sealers Plus range of Professional Grade Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

Problem Solver Options

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Sealers Plus range of Professional Grade Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Sealers Plus.

Important Information


  • Sealer is NOT a waterproofing agent and will not prevent surface wear, scuff marks or etching from harsh or acidic chemicals.
  • Spills should be wiped up immediately to help minimise staining.


  • Once enhanced, surfaces CANNOT be restored to original appearance.
  • Shelf life is approximately 1 year in un-opened container.
  • Storage beyond that time does not necessarily mean the product is not usable. Do a small test area first.
  • Product may harden or gel in container if not stored correctly or past shelf life. Discard and do not use.


  • Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine number of coats, surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.
Sealers Plus