Sealers

Natural Look Sealers for natural Stone, Tile, Grout, Concrete, terrazzo, Encaustics and more

Without a sealer, porous stone, tile, concrete and grout will stain almost instantly. Natural look sealers are formulated to provide stain resistance in porous surfaces whilst maintaining the natural look of the surface. Sealers although not impenetrable and work by providing reaction time to enable you to remove the offending contaminant. Aqua-Seal STS™ provides a range of sealers offering different reaction times against a variety of contaminants.

USE: For porous surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other  surfaces where a stain and water resistance is required.

AQUA-SEAL GOLD+

AQUA-SEAL GOLD+

AQUA-SEAL GOLD+ is a Premium, Low VOC (<5gm/L), natural look, no sheen, breathable, penetrating sealer. NanoPlus™ Formula penetrates deeper and chemically bonds to provide Maximum stain resistance against oil, food, grease & grime plus help consolidate stone, reduce freeze/thaw damage, spalling and efflorescence. Built in RapidPlus™ provides protection in 4 hours. Durable, water based, Non-Flammable, Non- Yellowing, Non-Coating, UV & Chemical Resistant. Safe for food areas.

AQUA-SEAL SILVER

AQUA-SEAL SILVER

AQUA-SEAL SILVER is a Low VOC (<5gm/L), natural look, no sheen, breathable, penetrating sealer. Provides EXCELLENT stain resistance. Also use as a pre-grouting sealer. Water based, Safe, Non-Flammable, Non-Yellowing & UV Resistant. Helps inhibit Efflorescence, Mould and Mildew growth. USE: For indoor, outdoor, domestic and commercial use. Safe for food areas.

AQUA-SEAL BRONZE

AQUA-SEAL BRONZE

AQUA-SEAL BRONZE is a Low VOC (<5gm/L), economical, natural look, no sheen, breathable, penetrating sealer. Provides GOOD stain resistance. Also use as a pre-grouting sealer. Water based, Safe, Non-Flammable, Non-Yellowing & UV Resistant. Helps inhibit Efflorescence, Mould and Mildew growth. USE: For indoor, outdoor, domestic and commercial use. Safe for food areas.

AQUASHIELD+

AQUASHIELD+

AQUASHIELD+ Utilising the latest NanoPlus Coating Technology to provide excellent protection against build up of soap scum, dirt, hard water and lime scaling. For all glass surfaces – Shower Screens, Glass Splash backs, Mirrors, Outdoor Windows, Pool Glass Surrounds etc. Also suitable for ceramic and porcelain wall shower tiles (not for floor use).

ULTRA-BLOCK

ULTRA-BLOCK

ULTRA-BLOCK is an economical, Low VOC, water based, installation sealer. Ideal for six sided sealing, dip-sealing, underside sealing & pre-grouting sealing. Helps consolidate stone and make grouting easier. Reduces picture framing, efflorescence, mineral blooming, staining during grouting & adhesive blotch marks which are normally absorbed through the back of the stone during installation. Ideal for all natural stone including bluestone, marble, sandstone, travertine plus terracotta, terrazzo, encaustic tiles etc

SPRAY'N'SEAL

SPRAY'N'SEAL

SPRAY’N’SEAL is a breathable, premium, natural look sealer to provide maximum stain resistance to stone, tile, mosaics, grout & other porous surfaces. It is non-yellowing, non-coating and UV resistant. Can be used on newly installed grout 2 hours after grouting however for best performance allow grout to fully cure before sealing. Utilises the latest NanoPlus™ & Rapid-Seal™ C6 Fluoro Technology to provide good stain resistance after only 4 hours. Can also be used as a pre-grouting sealer. Allows excellent Moisture Vapour Transmission (MVT). For interior & exterior.

The below “How To Videos” should be used only as a quick reference.

Do not hesitate to contact Sealers Plus Technical Service via e-mail sales@sealersplus.com.au or +61 2 9521 4000 with information specific to the situation you are addressing, for additional options.

Sealers Plus