Home > Products > Problem Solvers > Grout Release Pro

Grout Release Pro

Pre Grout Coating and Release Agent

Grout Release Pro™ Pre-Grout Coating & Release Agent

GROUT RELEASE PRO – Pre Grout Release Agent

Grout Release Prois a highly effective, easy to use, temporary, non-sealer type, pre-grout coating to help protect against grout, mortar and adhesive staining during installation and help simplify the grout clean up process. USE: On all porous and textured encaustic tiles, natural stone, ceramic tile, porcelain tile, terracotta, pavers, concrete and other surfaces.

Key Features

  • Helps Minimise Staining From Grout & Adhesive
  • Makes Grouting Easier & Simplifies Grout Clean Up
  • Safe To Use On Encaustic Tiles, Porcelain Tiles & Natural Stone


• 1 litre

• 4 litre


  1. Allow surface to fully dry after preparation then sweep, vacuum or wipe;
  2. Apply an even coat of Grout Release Pro over the entire surface using a string mop, paint pad, sponge, applicator, brush or heavy-textured paint roller.
  3. Ensure 100% coverage. Some surfaces may require a second coat;
  4. Allow a minimum of 30 minutes drying time for Grout Release Pro before grouting.When coating is no longer tacky then the grouting can begin;
  5. Follow grout manufacturer’s instructions for grouting process.
  6. Grout Release Pro residue should be removed from the surface through normal grout clean-up process.
  7. If Grout Release Pro residue remains on surface, use XtremeClean as per label instructions to remove.
  8. Rinse thoroughly.


  1. Read entire label, SDS & technical bulletin before using;
  2. Wear appropriate gloves, skin & eye protection;
  3. Use when surface temperature is between 4°C and 28°C;
  4. Keep product from contact with any non-recommended surfaces;
  5. For most smooth porous surfaces, an application of an Aqua-Seal STS sealer may be used in lieu of Grout Release Pro prior to grouting;
  6. Some porous or textured surfaces may require a pre-seal of an appropriate Aqua-Seal STS sealer before applying Grout Release Proespecially when using dark or contrasting coloured grout;
  7. Do NOT saturate the open grout joints;


  1. Some porous or textured surfaces may require a pre-seal coat of an appropriate Sealers Plus Sealer before applying Grout Release Pro especially when using dark or contrasting coloured grout;
  2. Proper grouting and grout clean up procedures should be used to help minimise grout, mortar & adhesive staining of porous surface


  1. Close container tightly after each use;
  2. Store in original container between 4°C and 32°C;
  3. Do not re-use empty container.
  4. Discard in rubbish or recycle.
  5. Wash tools, gloves & shoes thoroughly with clean water;
Problem Solver Options

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Sealers Plus™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Sealers Plus™

Sealer Options

The Sealers Plus™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.


The Sealers Plus™ range of accessories are designed to make sealing, cleaning and problem solving applications easier.


The Sealers Plus range of biodegradable Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.

Sealers Plus