Boost
Everyday Cleaner & Re-Sealer
Boost – Concentrated Everyday Cleaner & Re-Sealer for Sealed Natural Stone, Tiles, Grout, Encaustics, Terrazzo etc
BOOST is a new generation, rinse free, streak free ultra concentrated pH neutral cleaner & re-sealer. This NO VOC, biodegradable neutral cleaner when used regularly and as per directions helps maintain your sealed surface in a pristine condition and ensures longevity of your existing sealer. Regular use also helps prevent build up of soap scum and hard water deposits. Leaves a room smelling fresh and clean with a fresh lemon scent. USE: For sealed stone, tile, grout, porcelain tile and other surfaces.
USE: For sealed surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces to clean the surface and help prolong the sealer lifespan.
Note: For high traffic, commercial or food areas or where premium performance/stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE’N’SEAL
Key Features
- Safe & Easy To Use – Rinse Free – Streak Free Formula
- Ultra Concentrated – Pleasant lemon scent – Phosphate free
- For Routine cleaning of tile, stone, grout, encaustic tiles etc
- Regular Use Helps Prevent Grime & Soap Scum Build Up
- Boosts existing sealer & polished porcelain factory pre-seal
TEST FIRST
AVAILABLE SIZES
AVAILABLE SIZE:
1 Litre
PRECAUTIONS
- Read entire label, SDS & technical bulletin before using;
- Wear appropriate skin & eye protection;
- Use when surface temperature is between 4°C & 32°C;
- Do NOT allow contact with non recommended surfaces;
- Do NOT mix with other chemicals;
- Change the cleaning solution as it gets dirty;
LIMITATIONS
-
-
- Boost is formulated to keep a clean surface always looking clean.
- Not for heavy duty cleaning. Heavily soiled or neglected areas will require cleaning with XtremeClean.
- Refer to www.aqua-seal.com.au for appropriate heavy duty cleaning or problem solving product
-
HANDLING, STORAGE & CLEAN UP
HANDLING, STORAGE & CLEAN UP
-
-
-
- Close container tightly after each use;
- Store between 4°C and 32°C.
- Do not re-use container. Discard in rubbish.
- Clean tools and hands with clean water.
-
-
FIRST AID
APPLICATION INSTRUCTIONS
APPLICATION INSTRUCTIONS:
-
- Sweep, vacuum, or wipe surface;
- Dilute Boost as follows:
- a) GENERAL:Dilute 50ml of Boost to 4 litres clean water.
- b) HEAVY: Dilute 100ml of Boost to 4 litres clean water
- Damp mop the surface with a microfibre mop or white nylon pad;
- NO RINSING REQUIRED;
- Repeat the process as necessary.
Use For
Accessories
The Aqua-Seal STS™ range of accessories are designed to make sealing, cleaning and problem solving applications easier.
Other Cleaning Products
The Aqua-Seal STS™ range of biodegradable Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.
Stone Gel+ Gel Type Stone & Terrazzo Deep Clean Conditioner + Disinfectant
Stone & Terrazzo Deep Clean Gel and Disinfectant
Stone Wash+ Stone & Terrazzo Deep Clean Conditioner and Disinfectant
Stone & Terrazzo Deep Clean Conditioner and Disinfectant
XtremeClean+ Heavy Duty Stone, Tile and Grout Cleaner
Heavy Duty Stone, Tile & Grout Cleaner + Disinfectant
EzyClean+ Concentrated Stone, Tile and Grout Cleaner + Disinfectant
Concentrated Stone, Tile and Grout Cleaner + Disinfectant
Grout Clean Pro+ Spray Type Heavy Duty Stone, Tile and Grout Cleaner
Spray Type Heavy Duty Stone, Tile and Grout Cleaner
Boost – Concentrated Cleaner and Sealer Booster for Stone, Tile and Grout
Concentrated Cleaner and Sealer Booster for Stone, Tile and GroutProblem Solver Options
Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.
Haze Away – Grout Haze Cleaner and Inhibitor
Water Based Sealer, Coating & Epoxy Grout Haze Remover
Grip-It T for Tiles – Anti Slip for Ceramic and Porcelain Tiles
Anti Slip for Ceramic and Porcelain Tiles
Rust Away – Non Acidic Rust, Iron, Metal and Bore Remover
Rust, Bore, Iron and Metal Oxide Remover
Oxi Gel+ Ready To Use Gel for Grout Haze, Soap Scum, Grime and Efflorescence
Heavy Duty Gel Cleaner for Grout Haze, Soap Scum & more
OxiTreat+ Heavy Duty Grout Haze, Efflorescence and Grime Remover
Heavy Duty Acid Cleaner & Disinfectant
Active Plus – Leaf, Mould, Tannin and Heavy Duty Cleaner
Leaf, Mould, Tannin and Heavy Duty Cleaner
Sealer Options
The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.
Premium Grout Colourant – Colour’N’Seal
Premium Grout Colourant to Re-Colour and Seal Grout
Spray’N’Seal – Premium Aerosol Sealer for Stone, Tile and Grout
Premium Natural Look Aerosol Sealer for Stone, Tile and Grout
UltraBlock – Installation Sealer for Pre-Sealing, Dip Sealing and Six Sided Sealing.
Installation Sealer for Pre-Sealing, Dip Sealing and Six Sided Sealing.
Enhance’N’Seal – Premium Stone Sealer + Colour Enhancer
Premium Sealer and Colour Enhancer - Seal and Enhance Colour
Aqua-Seal Silver – Natural Look Stone, Tile and Grout Sealer (Better)
Natural Look Penetrating Type Sealer (Better)
Premium Sealer for Stone, Tile, Grout – Aqua-Seal Gold+
Premium Natural Look Sealer (Best) NanoPlus + RapidSeal FormulaImportant Information
LIMITATIONS:
-
-
-
-
- Boost is formulated to keep a clean surface always looking clean.
- Not for heavy duty cleaning. Heavily soiled or neglected areas will require cleaning with XtremeClean
-
-
-
TEST FIRST:
Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.