AquaGuard

Spray & Wipe – Cleaner & Re-Sealer

AquaGuard™ One Step Cleaner & Re-Sealer
AquaGuard™ One Step Cleaner & Re-Sealer

AQUAGUARD – SPRAY & WIPE CLEANER & RE-SEALER FOR SEALED NATURAL STONE AND ENGINEERED BENCH TOPS, TABLE TOPS, BAR TOPS ETC

AquaGuard™ is a new generation ready-to-use one-step cleaner and re-sealer for use on all sealed stone, tile, grout, and other water-safe surfaces. This Australian cleaning solution is perfect for domestic, commercial, or industrial situations. It helps to remove surface dirt, grease, and grime while also inhibiting the growth of mould, mildew, and odours. AquaGuard™ is designed to boost the performance and longevity of existing natural look penetrating sealers, making it an excellent choice for sealed stone maintenance, tile maintenance, and grout maintenance.

USE: For sealed surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces to clean the surface and help prolong the sealer lifespan.

Note: For high traffic, commercial or food areas or where premium performance/stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE’N’SEAL

Key Features
  • Ready to use everyday cleaner – Spray & Wipe
  • Boosts Sealer Performance
  • Cleans and deodorisers
  • Helps dissolve grease and grime
  • Ideal for all bench tops, table tops, vanities, bars etc

AVAILABLE SIZE

500 ml     500 ml

TEST FIRST

Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.

PRECAUTIONS

    1. Always test first;
    2. Read entire label, SDS & product technical bulletin before using;
    3. Wear appropriate skin & eye protection;
    4. Use when surface temperature is between 4°C & 32°C
    5. Do not mix with other chemicals;
    6. Do not allow product to come in contact with any non-recommended surfaces;

APPLICATION INSTRUCTIONS

      1. Spray AquaGuard directly to surface;
      2. Allow to dwell for a few minutes;
      3. Wipe completely dry with absorbent paper towels or a clean dry cloth;Repeat the process as necessary;
      4. Heavily soiled areas may require scrubbing with a white nylon pad plus a longer dwell time.
      5. Note: Regular use will help prolong the performance of the existing sealer;

LIMITATIONS

        • Will not restore polish finish to dull, etched, worn, scratched or honed surfaces;
        • Contact Aqua-Seal STS for appropriate re-polishing product;

HANDLING, STORAGE & CLEAN-UP

        • Close container tightly after each use;
        • Store between 4°C and 32°C.
        • Do not re-use container. Discard in rubbish.
        • Clean tools and hands with clean water.

FIRST AID

        • Contact a doctor or Poisons Information Centre (Australia Ph: 131-126, NZ Ph: 0800 764766).
        • Ingestion: Do not induce vomiting. Give water or milk to drink.
        • Eyes: No effects expected. If irritation occurs, immediately flush eyes with clean, running water for at least 15 minutes & see a doctor.
        • Skin & Hair: Remove contaminated clothing. Immediately wash contaminated skin & hair with plenty of water.
        • Inhalation: First aid not generally required. If in doubt, seek medical advice.
        • General: If irritation persists or feeling unwell, seek medical attention.

Other Cleaning Products

The Aqua-Seal STS™ range of biodegradable Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.

Accessories

The Aqua-Seal STS™ range of accessories are designed to make sealing, cleaning and problem solving applications easier.

Problem Solvers

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.

Sealer Options

The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

Important Information

LIMITATIONS:

        • Will not restore polish finish to dull, etched, worn, scratched or honed surfaces;
          Contact Aqua-Seal STS for appropriate re-polishing product;

TEST FIRST:

        • Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.
Sealers Plus