Home > Surface Finder > Travertine > Travertine Polished


Different surfaces have different requirements in order to keep their beauty and integrity. Aqua-Seal STS offers Pre-Grout Sealing, Sealing, Maintenance and Restoration specifications. These are listed below for your convenience.

Travertine is a form of limestone (sedimentary rock) formed in hot springs and/or limestone caves. It is a durable stone and consists of naturally formed holes caused by carbon dioxide or CO2 bubbles. These holes are usually filled at the factory during fabrication or with grout or cement during installation. Like most sedimentary rocks, travertine colours range from white, cream & buff through to tan, brown and red. A polished finish is smooth with a high gloss which also brings out the colour of the stone. Due to the high content of calcium carbonate, travertine is susceptible to etching from acid based contaminants eg wine, citrus, soft drinks etc. Etching and traffic wear patters are more noticeable on polished surfaces.

Important Note

Read entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application & desired results.

Sealers Plus